Agilent Technologies Infiniium 9000 Series User Manual page 2

In This Book
This book provides the information you need to begin using the Infiniium 9000
Series oscilloscope. It contains four chapters:
Chapter 1, "Setting Up the Oscilloscope", contains inspection, power
requirements, air flow, and setup information.
Chapter 2, "Working in Comfort", contains recommendations for working
comfortably and safely while operating the Infiniium oscilloscope.
Chapter 3, "Using the Oscilloscope", gives an overview of the front panel and
the graphical user interface, and tells you how to perform basic operations
with the oscilloscope.
Chapter 4, "Accessing the Online Help", describes the Infiniium oscilloscope
application's online help contents and navigation. The online help describes
how to use the Infiniium oscilloscope software in more detail.
For More Information
• For detailed information on how the oscilloscope makes measurements and
how to use the oscilloscope, see the Infiniium oscilloscope application's
online help.
• For information on programming the oscilloscope using a computer with a
GPIB interface card or LAN interface card, see the Programmer's Reference
for your model number oscilloscope found in the Infiniium oscilloscope
application's online help.
• For information on testing and servicing the oscilloscope, see the Service
Guide manual found in the Infiniium oscilloscope application's online help.