Agilent Technologies Infiniium 9000 Series User Manual page 102

Notices
© Agilent Technologies, Inc.
2012
No part of this manual may be
reproduced in any form or by
any means (including elec-
tronic storage and retrieval or
translation into a foreign lan-
guage) without prior agreement
and written consent from Agi-
lent Technologies, Inc. as gov-
erned by United States and
international copyright laws.
Manual Part Number
54904-97008, November 2012
Print History
54904-97008, November 2012
54904-97006, October 2009
54904-97001, June 2009
Restricted Rights Legend
If software is for use in the per-
formance of a U.S. Government
prime contract or subcontract,
Software is delivered and
licensed as "Commercial com-
puter software" as defined in
DFAR 252.227-7014 (June 1995),
or as a "commercial item" as
defined in FAR 2.101(a) or as
"Restricted computer soft-
ware" as defined in FAR 52.227-
19 (June 1987) or any equivalent
agency regulation or contract
clause. Use, duplication or dis-
closure of Software is subject
to Agilent Technologies' stan-
dard commercial license terms,
and non-DOD Departments and
Agencies of the U.S. Govern-
ment will receive no greater
than Restricted Rights as
defined in FAR 52.227-19(c)(1-2)
(June 1987). U.S. Government
users will receive no greater
than Limited Rights as defined
in FAR 52.227-14 (June 1987) or
DFAR 252.227-7015 (b)(2)
(November 1995), as applicable
in any technical data.
Document Warranty
The material contained in this
document is provided "as is,"
and is subject to being changed,
without notice, in future edi-
tions. Further, to the maximum
extent permitted by applicable
law, Agilent disclaims all war-
ranties, either express or
implied, with regard to this
manual and any information
contained herein, including but
not limited to the implied war-
ranties of merchantability and
fitness for a particular purpose.
Agilent shall not be liable for
errors or for incidental or con-
sequential damages in connec-
tion with the furnishing, use, or
performance of this document
or of any information contained
herein. Should Agilent and the
user have a separate written
agreement with warranty terms
covering the material in this
document that conflict with
these terms, the warranty terms
in the separate agreement shall
control.
Technology Licenses
The hardware and/or software
described in this document are
furnished under a license and
may be used or copied only in
accordance with the terms of
such license.
WARNING
A WARNING notice
denotes a hazard. It calls
attention to an operating
procedure, practice, or
the like that, if not
correctly performed or
adhered to, could result
in personal injury or
death. Do not proceed
beyond a WARNING
notice until the indicated
conditions are fully
understood and met.
CAUTION
A CAUTION notice
denotes a hazard. It calls
attention to an operating
procedure, practice, or
the like that, if not
correctly performed or
adhered to, could result
in damage to the product
or loss of important data.
Do not proceed beyond a
CAUTION notice until the
indicated conditions are
fully understood and met.
Trademark Acknowledgements
Windows and MS Windows are
U.S. registered trademarks of
Microsoft Corporation.
MATLAB is a U.S. registered
trademark of MathWorks.
Mathcad is a U.S. registered
trademark of Mathsoft.