Agilent Technologies Infiniium 9000 Series User Manual page 18

Setting Up the Oscilloscope
2
Connect the probe to the circuit of interest using the browser or other probing
accessories.
Figure 1-4
Probing the Circuit
3
Disconnect the probe.
C A U T I O N Do not attempt to twist the snap-on probes on or off the oscilloscope's BNC
connector. Twisting the probe connector body will damage it.
C A U T I O N Do not exceed the maximum input voltage rating. The maximum input voltage
!
for the 50 Ω inputs is ±5 Vpeak, CAT I and for the 1 MΩ inputs, it is 150 Vrms
(or dc), CAT I, ±250 V (dc + ac) in ac coupling.
18