Table of Contents
Advertisement
Supermicro SC506 Chassis User's Manual
3.4 Installing the Motherboard
Chassis Standoffs
Standoffs prevent short circuits by securing space between the motherboard and the chassis
surface. The SC506 chassis includes permanent and removable standoffs in locations used
by Flex-ATX or Mini-ITX sized motherboards.
Motherboard Installation
Installing the Motherboard
Review the documentation that came with your motherboard. Become familiar with component
placement, requirements, precautions, and cable connections. The SC506 chassis supports
9.6" x 9.6" Micro ATX motherboards. Refer to the Supermicro Web site or contact Supermicro
for assistance.
1. Power down the server, disconnect the power cord from the power supply and remove
the cover.
2. Compare the mounting holes in the motherboard to those in the chassis then add or
remove standoffs as needed.
3. Lay the motherboard in the chassis, aligning it with the standoffs.
4. Secure the motherboard to the chassis using the rounded, Phillips head screws. Do not
exceed eight pounds of torque when tightening down the motherboard.
5. Secure the CPU(s), heatsinks, and other components to the motherboard as described
in the motherboard documentation.
6. Connect the cables between the motherboard, chassis, front panel, and power supply,
as needed.
Figure 3-5: Installing a Motherboard
24
Advertisement
Table of Contents
