Uninstalling Mount Pin Holder; Hook Lever - Kubota LA535 Assembly Instructions Manual

26 ASSEMBLY INSTRUCTIONS
BUninstalling Mount Pin Holder
Uninstall the mount pin holder.
(1) Mount pin holder
BHook Lever
1. Install spring to hook assembly through left side of the
lever.

(1) Hook lever

(2) Spring
A After installing, the spring opening should be towards
the left.
(A) Spring opening
2. Install hook through the back side of side frame, then
install pin from outside of side frame.
(1) Hook
(2) Pin
(3) M10 x 30 bolt with washers
(4) M10 nut