Preparation For Hydraulic Line On Tractor Side [Msl Kit And Swift-Tach Kit Only]; Preparation For Hydraulic Line On Tractor Side [Except Lx3310, Lx2610, Lx2610Su] - Kubota LA535 Assembly Instructions Manual

4. Remove the spring pins holding the stands to the
boom.
5. Rotate the stands until the pin on the stand and hole in
the boom are aligned.
Then slide the stands outward and insert the cotter pin
as shown.
(1) Stand
BPreparation for Hydraulic Line on Tractor
Side [MSL kit and Swift-tach kit Only]
Remove the couplers and caps from the tractor as shown
below. Rewind sealing tape and attach the adapter.
(1) Coupler
(2) Cap
(3) Adapter
(2) Cotter pin
ASSEMBLY INSTRUCTIONS
BPreparation for Hydraulic Line on Tractor
Side [Except LX3310, LX2610, LX2610SU]
Check the manufacturer of the hydraulic couplers (male)
on the tractor side and the hydraulic couplers (female) on
the loader side. If they are not identical, it is necessary to
replace the hydraulic couplers (male) on the tractor side
as follows. The combination of different manufacturers will
lead to poor performance.
Old 7J612-6622-0 1/4 NIPPLE HNV14NPTM 4 ea.
New K2581-6622-0
A The difference between two couplers can also be
confirmed by stamps as shown in the figure.
(A) Old: "HNV14NPTM"
New: "H2-63"
1/4 NIPPLE H2-63 4 ea.
7