Table of Contents
Advertisement
20
ASSEMBLY INSTRUCTIONS
10. Pass the wire harness as shown below. Clamp it at the
white-taped positions.
(1) 2-W-clamp
(1) W-clamp
(1) Tree type band
BTractor Side/ROPS Section
C Control Lever for ROPS model
1. Replace the original control lever with new one and
pass the wire harness as shown below.
Then, connect the wire harness.
(1) Control lever
(2) 2-M6 bolts
(3) Wire harness
C Wire harness for ROPS model
1. Detach the steering wheel removing the pad, an M12
nut and spring washer and then detach the meter
panel removing the 5 bolts.
(1) Steering wheel
(2) Pad
M12 nut
Spring washer
(3) Meter panel cover
(4) 4-M16 x 14 bolt with washer
(5) Screw
Hide quick links:
Advertisement
Table of Contents
