Storing Pump For Winterization - Hayward Max-Flo II Pump Series Installation, Operation & Parts Manual

™
M ax-Flo II Series __________________
Storage/Winterization
ATTENTION –
ATTENTION –
toxi c and will not damage plastic system components; other anti-freezes are highly toxic and may damage plastic componen
in the system.
Drain all water fr om pump and piping when expecting freezing temperatures or when storing pump for a long time (see
instructions below).
Keep motor dry and co
plastic film or bags.

Storing Pump For Winterization

www.haywardcanada.com
WARNING –
Separation Hazard. Do not purge the system with compressed air. Purging
the system with compressed air can cause components to explode, with risk of severe injury or death to
anyone nearby. Use only a low pressure (below 5 PSI), high volume blower when air purging the pump,
filter, or piping.
Allowing the pump to freeze will void the warranty.
Use ONLY propylene glycol as antifreeze in your pool/spa system. Propylene glycol is non-
vered during storage. To avoid condensation/corrosion problems, do NOT cover or wrap pump with
WARNING –
bef ore draining pump. Fai
1. Drain water level below all inlets to the pool.
2. Remove drain plugs from bottom of strainer body, and remove strainer cover from strainer housi
3. Disconnect pump from mounting pad, wiring s
system.
4. Once the pump is removed of water, re-install the strainer cover and drain plugs. Store pump in a
dry area.
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
___ _________________________
To avoid dangerous or fatal electrical shock hazard, turn OFF power to motor
lure to disconnect power may result in serious personal injury or death.
ystem (after power has been turned OFF), and piping
Page 7 of 8
ts
ng.