Useful Functions; Automatically Sewing Reverse/Reinforcement Stitches - Brother NX-600 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Useful Functions

Functions useful in improving sewing efficiency are described below.
Automatically sewing reverse/
reinforcement stitches
The sewing machine can be set to automatically sew
reverse or reinforcement stitches at the beginning and
end of the stitching.Whether reverse stitches or
reinforcement stitches are sewn depends on the stitch
that is selected. For details, refer to "Stitch Settings"
(page 132).
a Turn on the sewing machine.
The LCD comes on.
b Select a stitch.
• For details on selecting a stitch, refer to
"Selecting stitching" (page 66).
c
Press
The settings screen appears.
d Press ,
is selected.
e Press
The screen for specifying automatic reverse/
reinforcement stitching appears.
(Settings key) in the operation panel.
, and (Arrow keys) until
(OK key).
f Press to select
To return to , press
The machine is now set to automatically sew
reverse/reinforcement stitches.
g Press (OK key).
The initial stitch screen appears again, and
appears in the lower-left corner of the
screen.
• When the sewing machine is turned off, the
automatic reverse/reinforcement stitching
setting is cancelled.
h Position the fabric under the presser foot, and
then press (Start/stop button) once.
1
a Start/stop button
After reverse/reinforcement stitches are
sewn, the machine starts sewing.
After reaching the end of the stitching, press
i
(Reverse/reinforcement stitch button)
once.
This step is not necessary if a stitch such as
those for sewing buttonholes and bar tacks is
selected where reinforcement stitches are
automatically sewn.
.
.

Useful Functions 57