Using Thread That Winds Off Quickly; Pulling Up The Bobbin Thread - Brother NX-600 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Using thread that winds off
quickly
When using thread that winds off quickly, such as
transparent nylon thread or metallic thread, place the
enclosed spool net over the spool before placing the
spool of thread onto the spool pin.
If the spool net is too long, fold it to fit the size of the
spool.
1
3
a Spool net
b Spool
c Spool cap
d Spool pin
2
4

Pulling up the bobbin thread

When making gathers or before free-motion quilting,
first pull up the bobbin thread as described below.
Insert the bobbin into the shuttle.
a
a
• Refer to steps through
bobbin" (page 22).
Pass the bobbin thread through the slot.
b
Do not cut the thread with the cutter.
While lightly holding the upper thread with
c
your left hand, press
button) twice to raise the needle.
a Needle position button
The bobbin thread is looped around the
upper thread and can be pulled up.
Carefully pull the upper thread upward to pull
d
out the end of the bobbin thread.
e
of "Installing the
(Needle position
1
Upper Threading 31