Positioning The Fabric - Brother NX-600 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Positioning the fabric

Be sure that the fabric pieces are sewn in the correct
order and that the right and wrong sides of the fabric
are aligned correctly.
a
Turn on the sewing machine.
The straight stitch (left needle position) is
automatically selected.
b Press
twice to raise the needle.
a Needle position button
c Place the fabric under the presser foot.
• If the seam allowance is positioned on the
right side, sewing in a straight line is easier
and the extra fabric does not get in the way.
d While holding the end of the thread and the
fabric with your left hand, turn the balance
wheel toward you with your right hand to
lower the needle to the starting point of the
stitching.
(Needle position button) once or
1
e
Lower the presser foot lever.
a Presser foot lever
The fabric is now positioned to be sewn.
Memo
To adjust the pressure that the presser foot
applies to the fabric, refer to "Adjusting the
pressure of the presser foot" (page 39).
1
Sewing 47