Planet Networking & Communication PL-702 User Manual page 25

erased and random security key has been generated. It must now be linked to
your network to adopt the new network security key.
Step 3
Currently, Bridge A and Bridge B are not networked
Step 4
Press and hold the Security button on Bridge A for 1~3 seconds then
release.
Step 5
The Power lights on Bridge A starts to flash.
Step 6
Within 120 seconds after the Power light on Bridge A starts to flash,
press and hold the Security button on Bridge B for 1~3 seconds then release.
Step 7
Both Bridge A and Bridge B are now networked together.
Establish Powerline (C) to join an existing network (Network AB)
The procedure is as follows:
Step 8
Press and hold the Security button on Bridge C for no more than 10
seconds. Must release after 10 seconds. Once released, the Power light will
flash. The password to Bridge C has just been erased and random security key
User's Manual of PL-702
25