GREISINGER ResOx5695 Application Instructions

H84.0.16.6AC-02
Application Instructions
ResOx5695 – Measuring oxygen in protective atmospheres
For quick and comfortable measuring of residual oxygen in food packaging in modified atmosphere packaging (MAP).

Scope of Supply

Nr #

1 Instrument GMH 5695 incl. battery

1 Sensor housing with pressure
compensation connection incl. Sensor
GOEL

1 Gas sampling pump GS 150 incl. battery

1 Tube set (3 tubes, T-piece)

2 GDZ Filter

2 GOG-N insertion needles Ø 0,9 mm

1 GOG-B: 40 pieces sampling stickers
1 Case GKK 1420
1 Operating and Short form manuals for
GMH 5695, operating manual GS 150
1 Application instructions ResOx 5695

The measurement assembly is optimized for needles of Ø0.9mm. Using smaller needles may reduce the necessary
sampling volume. Attention: This may have an influence at the measuring precision
The sharp needles are causing a risk of injury! Handle carefully!
Sampling time:
Sampling volume:

Choosing the sensor element

Sensor element
Application range
Permanent operation with high CO
Short time exposition to CO
Use up to 100 % Vol O
2
Use below 0.5% Vol O
2
Speed /t
90
Life time
/hours per % Vol O , / at air
2
Measuring range O
2
O
2
ca. 15 s
Min. 20 ml (with filter GDZ 29)
Standard at ResOx 5695-L
Protection gases in general,
precise measuring at low O
<0,5 % Vol. O
concentrations > 35 % Vol. O
conc. -
2
+
2
+++
+++
++ / <10 s
+
/500.000 %h/ >2 years
partial pressure 0 ... 1100 hPa
concentration
0.0 ... 100.0 % Vol.
Connection scheme acc. to intended use


The pressure connection has to be connected to port "IN"
of the gas sampling pump. Correct connections are
necessary for pressure compensation in stiff packages
GOEL 381
(e.g.
2
) or
2
2
O
2





GOEL 370 (Rev 2)
Standard at ResOx 5695-H
Protection gases with CO
concentrations and O
concentrations below < 35 % Vol. O
+++
+++
-
+
++ / <10 s
++
/1.200.000 %h/ max. 6 years
0 ... 350 hPa
0.0 ... 35.0 % Vol.
O
2
precision above)
2
2
2
(reduced