Ecofeedback Consumption Display - Miele PFD 101 Operating Instructions Manual

EcoFeedback consumption
display
The "Consumption" function is used for
calling up information about the water
consumption of your dishwasher (see
"Consumption" under "Settings").
The following information can be shown
on the display:
- an estimate of the consumption be-
fore the program sequence
- the actual consumption at the end of
the program
- the total consumption of the dish-
washer
1. Estimated consumption
After a program has been selected, first
the name of the program and then the
estimated water consumption  will ap-
pear in the display for a few seconds.
The estimated consumption will be
shown as a bar chart. The more bars
that are visible (  ), the higher the wa-
ter consumption.
The values are influenced by the pro-
gram, any program options selected,
the ambient conditions, and the size of
the load.
The display will change automatically
from showing the estimated consump-
tion to showing the time remaining.
The estimated consumption function is
activated as standard. This function can
be deactivated, however, if preferred
(see "Consumption" under "Settings").
Caring for the environment
2. Displaying consumption
At the end of the program, you can call
up the actual water consumption for the
program that has just been run.
 Confirm the message
(OK) with OK.
Turning the dishwasher off at the end
of the program will delete the actual
consumption values for the program
that has just been run.
3. Total consumption
You can view the total consumption of
water for all previously used programs
of your dishwasher (see "Consumption"
under "Settings").
Consumption
31