Regulation (Digital Controller) - Tebas INVERTER S User Manual

Regulation (digital controller)

On / Off
When the regulator is turned off,
the display will show "Stand-by".
The button is used to turn the heat pump on / off.
After the machine is turned off with this button, it may take a few minutes for the machine to stop completely.
Modes of operation
The operating mode can be changed by pressing the button
After pressing it, the icon indicating the selected mode will appear.


+

+

+

+

+

+
Normal screen in heating mode
Buttons below the display
Intelligent heating and cooling mode - the device regulates its own power, ensuring the
highest efficiency.
The device heats the water to the desired temperature (+/– 1 ° C) *.
Eco heating and cooling mode - the device regulates its power by itself, keeping the
noise level / speed low.
The device heats the water to the desired temperature (+/– 1 ° C) *.
Intelligent heating mode - the device regulates its own power, ensuring the highest
efficiency.
The device heats the water to the desired temperature (+/– 1 ° C) *.
"Enhanced" heating mode - the device regulates its power by itself, keeping it at a high
level.
The device heats the water to the desired temperature (+/– 1 ° C) *.
Eco cooling mode - the device regulates its power by itself, keeping the noise level /
speed low.
The device heats the water to the desired temperature (+/– 1 ° C) *.
Intelligent cooling mode - the device self-regulates its power, ensuring the highest
efficiency.
The device heats the water to the desired temperature (+/– 1 ° C) *.
"Enhanced" cooling mode - the device regulates its power by itself, keeping it at a high
level.
The device cools the water to the desired temperature (+/– 1 ° C) *.
All icons are available
- 9 -