Priority Of The Heating Process - Tebas INVERTER S User Manual

L:
N:
: Uziemienie
• Connect the relay coil (A1 and A2) to the P1 and P2 terminals of the heat pump.
• Connect the relay to the input and output of a normally open contactor, in parallel to the filter pump clock relay.
Wiring diagram:
Filter pump timer
Confirmation of the priority of the heating process:
Check that the priority parameter of the heating process (parameter no. 9) is set to 1. If it is not,
please contact our customer service department.
P1:
P2:
HR:
Relay (dry contact)
- 7 -
Heat pump switchboard