Tebas INVERTER S User Manual page 10

Time setting
Press the button

Set the hour by pressing the

button
Press the button once

Set the minutes with the button

Press the button once

Setting the water temperature
Start the device and select the desired operating mode (see guidelines above).
After pressing the button, the display will show the message "SET" and the desired water temperature.
Work messages
Adjust the desired value with the button
The three symbols in the lower left corner of the screen are operating messages:
The first symbol indicates the flow of water:
The second means the fan:
The third means the compressor:
During the start-up delay period, the corresponding symbol will flash.
This symbol

This symbol

To lock or unlock the keys, press and hold the and buttons simultaneously for a few
seconds.
for 3 seconds (the hour will start blinking)
or
(the minutes will start flashing)
or
to approve.
or
means that the device is defrosting.
indicates that the keys are locked.
.
.
button and wait a few seconds until it is automatically saved.
- 10 -