•
There are two default passwords for the login page:
User Level
End User Level
Administrator Level
The password is case sensitive with maximum length of 25 characters.
•
When changing any settings, always SUBMIT them by pressing the "Save" or "Save and Apply"
button on the bottom of the page. If the change is saved only but not applied, after making all the
changes, click on the "APPLY" button on top of the page to submit. After submitting the changes in all
the Web GUI pages, reboot the phone to have the changes take effect if necessary (All the options
under "Accounts" page and "Phonebook" page do not require reboot. Most of the options under
"Settings" page do not require reboot).
BLF KEYS CONFIGURATIONS
To configure the BLF feature on GRP26XX phones:
1. On the Web UI, click on "Settings";
2. On the drop-down list, click on "Programmable Keys",
3. Then scroll to "Virtual Multi-Purpose Keys" as the figure shows below:
4. On the "Virtual Multi-Purpose Keys" page. Click on "Edit VPK". Under "Mode" tab Scroll down and click
on "Busy Lamp Field (BLF)";
Table 1: Default Passwords for Login Page
User
Password
user
123
admin
admin
Figure 1: Programmable Keys Settings
GRP26XX Series - BLF Guide
Web Pages Allowed
Only Status and Basic Settings
Browse all pages
P a g e
|
6