PAN1326C2 Bluetooth Module
3. Make sure that the box Manage the project's target-configuration automatically (2)
is checked.
4. Click Apply and Close (2).
5. Open the source code file (iBeaconDemo.c or SPPDemo.c) in the application file of the
project.
6. Go to line 166. Change 0x4c to 0x3a and change 0x00 to 0x00 (Panasonic Company
ID:0x003A) to change the manufacturer name of the Bluetooth Beacon.
Keep the little-endian byte format in mind (LSB first).
7. Press CTRL + S to save the changes.
Now the demo is loaded.
Quick Start Guide Rev. 1.0
4 Setting up the Demo
Page 12 of 20