Loading And Transport; Ground Transport - ABB MNS-SG Operation And Maintenance Manual

3.4.1. Loading and transport

The truck can be unloaded by crane or fork-lift truck. The
loads must be lowered onto a flat surface.

3.4.2. Ground transport

By fork-lift truck
-
By lifting and conveying devices
-
In an emergency, with rollers (min. 3 pieces)
-
Switchgear cubicles have to be transported only in the
-
vertical position.
Tilting and canting must be avoided
-
! WARNING
Cubicles may easily tip over when transported with a hand-
pulled truck. Therefore the distance between the wooden
cross beam or the pallet and the underground should not be
more than 3 mm.
Transport with a hand-pulled truck
Roller transport
22 MNS-SG Operation and Maintenance | Manual
Transport frame
(wooden beam 10 x 12 cm)
Crane transport, transport unit unpacked
Fork-lift transport
Crane transport, transport unit in box
Wooden
Crossbeam