Associating To The Printer - Brother HL-7050 Network User's Manual

Windows
Windows
called hosts.sam. If you wish to use the hosts file you must
rename the file to hosts with no extension. The .sam
extension stands for sample.
8
Click the OK button. When prompted you must re-boot your
computer.

Associating to the printer

You must now create a printer on your Windows
standard Windows
1
To do this, go the Start button, select Setting and then
Printers.
2
Select Add Printer to begin the printer installation.
3
Click Next when you get the Add Printer Wizard window.
4
Select Local Printer when you are asked how the printers are
connected to your computer, and then push Next.
5
Select the correct driver. Click Next when you are done.
6
If you have selected a printer driver that is already being used,
you have the option of either keeping the existing driver
(recommended) or replacing it. Select the desired option and
press Next.
7
Select the Brother LPR port (the port name you assigned in step
4 of the "Installing the Brother Peer to Peer Software" section)
and press Next.
8
Enter any desired name for the Brother printer and press Next.
For example, you could call the printer "Networked Brother
Printer".
®
9
Windows
select Yes and then select Finish.
3 - 3 PEER TO PEER PRINTING
®
95/98/Me store the hosts file in the default
®
directory. By default, the Windows
®
printer setup procedure.
will now ask you if you wish to print out a test page,
®
hosts file is
®
system using the