Brother HL-7050 Network User's Manual page 86

g
Highlight Print Queues Assigned and press ENTER and
then INSERT to get a list of available queues.
h
Highlight the name of the print queue you wish to assign to the
remote printer and press ENTER.
i
The other settings in the menu are not required. Push
ESCAPE several times to exit PCONSOLE.
j
Skip to the Assigning the remote printer name and
number sections below.
The following steps apply to configuring a remote printer on
NetWare 3.xx systems:
6
a
Select print server Information from the PCONSOLE main
menu and choose the name of the PSERVER NLM.
b
Select print server configuration and then printer
configuration. Select any Not Installed printer and press
Enter. Remember the number of this printer, since it will be
used later in the configuration process.
c
If desired, type in a new name for the printer.
d
Go to Type, press ENTER, highlight Remote Other/
Unknown and press ENTER again. The other settings in this
menu are not required.
e
Push ESCAPE and save the changes.
f
Push ESCAPE and select Queues Serviced by Printer.
g
Highlight the printer name that you just configured and press
ENTER.
h
Press INSERT, choose the desired print queue, and press
ENTER (you can accept the default priority).
i
Press ESCAPE several times to exit PCONSOLE.
NOVELL NETWARE PRINTING 6 - 20