Dec Tcp/Ip Servers For Vms(Ucx); Tgv's Multinet; Wollongong's Pathway; Ibm As/400 - Brother HL-7050 Network User's Manual

10
Select Hardwired as the Device.
11
Select No for the Require banner field.
Older SCO Unix Systems
The Brother print servers support the FTP protocol. Earlier SCO Unix
systems are often configured to print using the FTP protocol.

DEC TCP/IP Servers for VMS(UCX)

You need to run the sys$system:ucx:$lprsetup command,
specify a printer name, and then enter the print server IP address as
the remote system name. Specify one of the print server services
(see beginning of this section for options) as the remote system
printer name. Accept the defaults for other questions.

TGV's Multinet

TGV's Multinet requires you to run the MULTINET CONFIGURE /
PRINTERS command, then use the ADD command to add a printer,
specifying the print server IP address, a protocol type of LPD, and
one of the service options described at the beginning of this chapter
as the remote print queue.

Wollongong's PATHWAY

First make sure that you have the Access option with lpd enabled.
Then enter the print server name and IP address in the
TWG$TCP:[NETDIST.ETC]HOSTS file, run the LPGEN program,
and execute the command: add queue/
rmachine=prnservername/rprinter=prnserverservice,
where queue is the name of the queue, prnservername is the print
server name from the hosts file, and prnserverservice is the
print server service name.

IBM AS/400

To use a Brother print server with an IBM AS/400 running IBM's TCP/
IP gateways services for OS/400 (the OS/400 system must be v3.1
or later)
1 - 12 UNIX PRINTING