Brother HL-7050 Network User's Manual page 111

d
Click Add, go to the List of Printers, select the desired
printer type, and click Install. If desired, click Set as Default
Printer.
e
Click Connect and select the desired port (e.g., LPT1).
Click Network and select the port you chose above and type
in the network path (\\node\service, where node is the
DECnet node name and service is the service name
picked previously; for example, \\VAX\LASER).
f
Click Connect (the Current Printer Connection should
show the port and the network path that you selected).
g
Click Close, OK, Close, and Exit to get out of the Print
Manager.
9 - 6 LAT NETWORK CONFIGURATION