Brother HL-7050 Network User's Manual page 73

If necessary change the Print Server Name. The default
NetWare print server name will usually be BRN_xxxxxx_P1
where xxxxxx is the Ethernet address of the print server. Be
careful! Changing the name may impact the configuration of
other protocols because the print server service names will
be altered.
a
If it is not already selected, select Queue Server as the
operating mode.
b
Click the Change Bindery Queues button.
c
Select the NetWare server which you wish to configure.
d
Select the New Queue button and type in the queue name
which you wish to create.
e
Once you have done that highlight the queue name you
created and click on the Add button.
f
Click on Close and then OK.
Now exit the BRAdmin application. You are ready to print.
6 - 7 NOVELL NETWARE PRINTING