Windows 95/98/Me Peer-To-Peer (Hp Jetadmin Compatible Method) Troubleshooting; Windows 95/98/Me/Nt 4.0 Peer-To-Peer Print (Netbios) Troubleshooting - Brother HL-7050 Network User's Manual

®
Windows 95/98/Me Peer-to-Peer (HP JetAdmin
compatible method) Troubleshooting
If you are having trouble printing on a Windows
Peer network, check the following (HP JetAdmin compatible
method):
1
If the print server does not show up under JetAdmin on a
®
Windows
the Windows
Control panel and then reinstalling them as follows:
n
First install the IPX/SPX-Compatible Protocol (or the TCP/IP
protocol if you are using a later version of JetAdmin), the
Client for Microsoft Networks, and the network adapter card
driver.
n
Install the Latest HP JetAdmin software
n
Restart the system, and then add the HP JetAdmin service.
®
Windows 95/98/Me/NT 4.0 Peer-to-Peer
Print (NetBIOS) Troubleshooting
If you are having trouble printing on a Windows
later) Peer-to-Peer network (NetBIOS), check the following:
1
Make sure that the Brother NetBIOS Port driver is securely
installed and configured according to the Windows
NT 4.0 Peer-to-Peer (NetBIOS) chapters. You may find that
during the installation of the port driver, the screen that prompts
you for a Port name is not displayed. This happens on some
®
Windows
keys to make it appear.
2
Make sure that the print server is configured to be in the same
workgroup or domain as the rest of your computers. It may take
several minutes for the print server to appear in the network
neighborhood.
13 - 9 TROUBLESHOOTING
95/98/Me Peer-to-Peer network, try removing all of
®
95/98/Me network software from the Network
95/98/Me/NT 4.0 computers. Press the ALT and TAB
®
95/98/Me Peer-to-
®
95/98/Me/NT 4.0 (or
®
95/98/Me/