Download Print this page

Technical Data; Hammer Safety Warnings - Milwaukee FUEL SDS-MAX M18 FHM Original Instructions Manual

Hide thumbs Also See for FUEL SDS-MAX M18 FHM:

Advertisement

TECHNICAL DATA

Cordless Rotary Hammer
Production code
Frequency band
Radio-frequency power
Battery voltage
No-load speed
Rate of percussion under load max.
Impact energy per stroke according to EPTA-Procedure 05/2009
Chuck neck diameter
Drilling capacity in concrete
Tunnel bit in concrete, bricks and limestone
Core cutter in concrete, bricks and limestone
Weight according EPTA-Procedure 01/2014 (Li-lon 5,0 Ah ... 12,0 Ah))
Recommended Ambient Operating Temperature
Recommended battery types
Recommended charger
Noise information
VIII
Measured values determined according to EN 60745. Typically, the A-weighted noise levels of the tool are
Sound pressure level (Uncertainty K=3dB(A))
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!
Vibration information
Vibration total values (triaxial vector sum) determined according to EN 60745
Hammer-drilling into concrete
Vibration emission value a
Uncertainty K=
Chiselling:
Vibration emission value a
Uncertainty K=
WARNING!
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745
and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications,
with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over
the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is
running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.
WARNING! Read all safety warnings and all instruc-
tions. Failure to follow the warnings and instructions may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.

HAMMER SAFETY WARNINGS

Wear ear protectors. Exposure to noise can cause hearing loss.
Use auxiliary handle(s), if supplied with the tool. Loss of
control can cause personal injury.
Hold the power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring. Cutting accessory contacting a "live"
wire may make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
English
14
14
h, HD
h, Cheq
Additional Safety and Working Instructions
Use protective equipment. Always wear safety glasses when
working with the machine. The use of protective clothing is
recommended, such as dust mask, protective gloves, sturdy non-
slip footwear, helmet and ear defenders.
The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Use a dust absorption system and wear a
suitable dust protection mask. Remove deposited dust thoroughly,
e.g. with a vacuum cleaner.
Do not machine any materials that present a danger to health
(e.g. asbestos).
When working in walls ceiling, or floor, take care to avoid electric
cables and gas or waterpipes.
M18 FHM
4696 96 02...
... 000001-999999
2402-2480 MHz
1,8 dBm
18 V
380 min
-1
2900 min
-1
11 J
66 mm
45 mm (SDS-max)
65 mm (SDS-max)
150 mm (SDS-max)
9,7 ... 10,4 kg
-18 °C ... +50 °C
M18B5 – M18HB12
M12-18...
96,5 dB (A)
107,5 dB (A)
9,4 m/s
2
1,5 m/s
2
9,4 m/s
2
1,5 m/s
2

Advertisement

loading