Technical Data; Rotary Hammer Safety Warnings - Milwaukee M18 ONEFH Original Instructions Manual

TECHNICAL DATA

Type
Production code
Battery voltage
Single impact energy
Frequency band(s) of Bluetooth
Radio-frequency power
Bluetooth version
No-load speed
Rate of percussion under load
Chuck neck diameter
Drilling capacity in concrete
Drilling capacity in steel
Drilling capacity in wood
Light core cutter in bricks and limestone
Weight according EPTA-Procedure 01/2014 (2.0 Ah ... 12.0 Ah)
Recommended ambient operating temperature
Recommended battery types
Recommended charger
Noise Information
Measured values determined according to EN 60745.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level / Uncertainty K
Sound power level / Uncertainty K
Wear ear protectors.
Vibration Information
Total vibration values (vector sum in the three axes) determined
according to EN 60745.
Vibration emission value a / Uncertainty K
h
Hammer-drilling in concrete (a
Chiselling (a )
h,Cheq
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745
and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for diff erent applications, with
diff erent accessories or poorly maintained, the vibration emission may diff er. This may signifi cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running
but not actually doing the job. This may signifi cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the eff ects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
WARNING!
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric
shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.

ROTARY HAMMER SAFETY WARNINGS

Wear ear protectors. Exposure to noise can cause hearing loss.
Use auxiliary handles supplied with the tool. Loss of control can
cause personal injury.
Hold the power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring.
Cutting accessory contacting a „live" wire may make exposed metal
parts of the power tool „live" and could give the operator an electric
shock.
ADDITIONAL SAFETY AND WORKING INSTRUCTIONS
Use protective equipment. Always wear safety glasses when
working with the machine. The use of protective clothing is
recommended, such as dust mask, protective gloves, sturdy non-slip
footwear, helmet and ear defenders.
The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Wear a suitable dust protection mask.
26
470 482 - M18ONEFH, M18ONEFHX.indd 26 470 482 - M18ONEFH, M18ONEFHX.indd 26
)
h,HD
M18 ONEFH
Cordless Rotary Hammer
4831 84 01 XXXXXX MJJJJ 4831 94 01 XXXXXX MJJJJ
18 V
2,5 J
2402-2480 MHz
1,8 dBm
4.2 BT signal mode
1330 min
0-4800 min
46 mm
26 mm
13 mm
28 mm
65 mm
3,4 kg ... 4,4 kg
92,6 dB(A) / 3 dB(A)
103,6 dB(A) / 3 dB(A)
12,9 m/s 2 / 1,5 m/s
14,2 m/s / 1,5m/s
2
Do not machine any materials that present a danger to health (e.g.
asbestos).
Switch the device off immediately if the insertion tool stalls! Do not
switch the device on again while the insertion tool is stalled, as
doing so could trigger a sudden recoil with a high reactive force.
Determine why the insertion tool stalled and rectify this, paying heed
to the safety instructions.
The possible causes may be:
• it is tilted in the workpiece to be machined
• it has pierced through the material to be machined
• the power tool is overloaded
Do not reach into the machine while it is running.
The insertion tool may become hot during use.
WARNING! Danger of burns
• when changing tools
• when setting the device down
Chips and splinters must not be removed while the machine is
running.
When working in walls ceiling, or fl oor, take care to avoid electric
cables and gas or waterpipes.
Clamp your workpiece with a clamping device. Unclamped
workpieces can cause severe injury and damage.
Remove the battery pack before starting any work on the machine.
ENGLISH
M18 ONEFHX
Cordless Rotary Hammer
18 V
2,5 J
2402-2480 MHz
1,8 dBm
4.2 BT signal mode
1330 min
-1 -1
0-4800 min
-1
46 mm
26 mm
13 mm
28 mm
65 mm
3,6 kg ... 4,6 kg
-18...+50 °C
M18B...; M18HB...
M12-18...; M1418C6
92,6 dB(A) / 3 dB(A)
103,6 dB(A) / 3 dB(A)
2 12,9 m/s 2 / 1,5m/s
14,2 m/s / 1,5 m/s
2 2
23.03.2021 16:20:16 23.03.2021 16:20:16
-1
2
2