Performance Specifications - Tait TB8100 Using Manual

7

Performance Specifications

Minimum Receiver RF Level for a Robust Link
Strong Signal Packet Error Rate (PER)*
*for RF levels of 0dBm
Signal Displacement Bandwidth
Selectivity
Modulation Fidelity*
*measured as Error Vector Magnitude, through combined
receive and transmit paths
a. Unavailable at time of publication.
Page 8 of 10
4. Select one of the Extended bypass check boxes. This selects the
other Extended bypass check box as well. (You cannot configure
extended bypass separately for the transmit and receive paths.)
Extended bypass has been tested with external modems as follows:
narrow bandwidth C4FM
narrow bandwidth GMSK
wide bandwidth GMSK
The performance figures given in these specifications are typical, and are
supplied only as a guide to the expected performance. The actual
performance achieved by your system will depend on the specific external
modem used, and the interface levels into the TB8100.
9600bps
external modem based on a CML FX919 chipset
BT=0.5, 4800bps
external modem based on a CML FX489 chipset
BT=0.5, 9600bps
external modem based on a CML FX489 chipset
NB C4FM NB GMSK
a
–– –109dBm
(0.79µV)
-4 -4
<10 <10
>1kHz >1kHz
a
––
71dB
3.5% 6%
© Tait Electronics Limited 21 December 2005
WB GMSK
–109dBm
(0.79µV)
-4
<10
>2kHz
79dB
6%
TN-1114-AN