Advertisement
USER'S GUIDE
4–66
5. Set "Time Out" with the
TIME OUT= 5s
This time out is the duration during which the printer will not allow an
automatic emulation change. You can set it from 1 second to 99 seconds:
the factory setting is 5 seconds.
6. Press the SET switch.
The next sub-item "EPSON/IBM" appears on the display.
EPSON/IBM=EPSON*
7. Select EPSON or IBM with the
Since the printer cannot distinguish between the EPSON and IBM
emulation modes, you need to select the EPSON or IBM emulation even
in the AUTO mode.
When the printer receives data from the computer, it automatically
selects the emulation mode in any of the following combinations:
EPSON/IBM Priority
Auto Selection Mode
8. Press the SET switch.
The next sub-item "KEEP PCL" appears on the display.
KEEP PCL=OFF
This function is for permanent macros and fonts downloaded in the HP
LaserJet 4+ mode.
9. Turn on or off the "KEEP PCL" function with the
When you do not need to use the permanent macros and fonts in the HP
LaserJet 4+ mode, turn this function off. When you use them, you can
turn it on.
or
switch.
*
or
switch.
EPSON
IBM
HP LaserJet 4+
HP LaserJet 4+
BR-Script 2
BR-Script 2
HP-GL
HP-GL
EPSON FX-850
IBM Proprinter XL
or
switch.
Advertisement
