Economy Switch; Toner Save Mode; Power Save Mode - Brother HL-1260 User Manual

ECONOMY Switch

TONER SAVE MODE

You can turn on or off the toner save mode as follows:
Display Message
TONER SAVE=OFF
TONER SAVE=ON

POWER SAVE MODE

You can turn on or off the power save mode as follows:
Display Message
POWER SAVE=ON
POWER SAVE=OFF
When you turn on the power save mode with the SET switch, the display
shows the next sub-setting menu as follows:
You need to set the time out for the power save mode from 1 to 99 minutes
with the
duration after which the fixing assembly of the print engine is turned off
("SLEEP") to save power.
When the power save mode is turned on, the printer turns on the fixing
assembly again after it receives data from the computer. Since the fixing
assembly must reach the specified high temperature, it takes a little longer
time to start printing the first page.
Toner Save Mode
Turn off the toner save mode.
(Factory setting)
Turn on the toner save mode. The amount of
toner on the paper decreases and the printed
image may look light gray.
Power Save Mode
Turn on the power save mode. The fixing
assembly of the print engine is turned off
after the specified time to save power.
(Factory setting)
Turn off the power save mode. The fixing
assembly of the print engine is always
powered on to keep its temperature at the
specified level.
TIME OUT=30m
or switch: factory setting =30 minutes. The time out is the
CHAPTER 4 CONTROL PANEL
*
4–69