8.3
Spacer Flange
– Remove the air filter - b 8.1
– Remove the handle housing
- b 5.1
: Pull away the carburetor with the
gasket behind it.
2
1
: Take out the screws (1) and pull
the spacer flange with hex head
screws (2) out of the air baffle.
BT 45
1
: Pull the air baffle (1) out of the
guide (arrow) on the spiral
housing and remove it.
1
: Pull gasket (1) out of the guides
(arrows) on the spiral housing
and lift it away.
Install in the reverse sequence.
Use new gaskets and observe
tightening torques - b 3.3.
8.4
Servicing
8.4.1
Manual Fuel Pump
1
: Take out the screws (1).
– Remove the end cover with cap.
: Take the cap out of the end cover.
: Remove the flange.
25