Control Panel Indications; Operator Calls And How To Clear Them - Brother HL-1030 User Manual

Control Panel Indications

Operator calls and how to clear them

The LED indications as shown in the table below are used in the illustrations in this
chapter.


If a recoverable error occurs, the printer indicates an 'operator call' by the LED
indications as shown in the table below.
Identify the error from the table below and take the corrective action described for
each indication to correct it. The printer automatically recovers from most errors,
but you may also need to reset the printer with the panel button as described below.
For example, the following are the indications when the toner is low.
LED is Off
LED is Blinking
LED is On
Fig. 4-1 LED indications caused by toner low
4-2
Drum
Ready
Paper
Alarm
Toner
Data