How To Replace The Drum Unit - Brother HL-1030 User Manual

How to replace the Drum Unit

The printer uses a drum unit to create the print images on paper. If the Drum LED
is on, it indicates the drum unit is nearly at the end of its life. We recommend you
obtain a new drum unit to replace the current one. Even if the Drum LED is on,
you may be able to continue to print without replacing the drum unit for a while.
If there is a noticeable deterioration in the output print quality even before the
Drum LED lights, then the drum unit should be replaced.
!
Caution
When removing the drum unit, handle it carefully as it may contain toner.
You should clean the printer when you replace the drum
clean the printer" in this chapter
CD-ROM.
Note
The drum unit is a consumable, and it is necessary to replace it periodically.
There are many factors that determine the actual drum life, such as
temperature, humidity, type of paper and toner that you use, the number of
pages per print job, etc. Under ideal conditions, the average drum life is
estimated at approximately 20,000 pages. The actual number of pages that
your drum will print may be significantly less than this estimate. Because we
have no control over the many factors that determine the actual drum life, we
cannot guarantee a minimum number of pages that will be printed by your
drum.
For best performance, use only genuine Brother toner. The product should only
be used in a clean, dust-free environment with adequate ventilation.
Drum
Ready
Paper
Alarm
Toner
Data
Fig. 3-12 Drum unit nearly at the end of its Life
3-9
and in the instructional video on the supplied
CHAPTER 3 MAINTENANCE
unit. See "How to