Brother HL-1030 User Manual page 97

Image defect examples
.
ABCDEFGH
abcdefghijk
A B C D
a b c d e
0 1 2 3 4
White Vertical streaks
F G H
A B C D E
h i j k
a b c d e f g
A B C D
a b c d e
0 1 2 3 4
Page skew
Curl or wave
B DEFGH
abc efghijk
A C D
b c d e
1 3 4
Wrinkles or creases
Recommendation
You may clear the problem by wiping the scanner window with
a soft cloth. See "How to clean the printer" in Chapter 3.
The toner cartridge may be damaged. Install a new toner
cartridge. See "How to replace the Toner cartridge" in Chapter
3.
Make sure the paper or other media is loaded into the paper
cassette correctly and that the guides are not too tight or too
loose against the paper stack.
Set the paper guides correctly. Make sure that the tip of the
paper guides fit into the slot correctly.
into the Paper cassette" in Chapter 2.
If you are using the manual feed slot
sheet of paper manually" in Chapter 1.
The paper cassette may be too full.
into the paper cassette" in Chapter 2.
Check the paper type and quality.
I use" in Chapter 1.
Check the paper type and quality. Both high temperature and
humidity will cause paper to curl.
can I use" in Chapter 1.
If you use the printer infrequently, the paper may have sat for
too long in the paper cassette. Turn over the stack of paper in
the paper cassette. Also, try rotating the paper 180 in the
paper cassette.
Try printing using the straight-through output path.
to load one sheet of paper manually" in Chapter 1.
Make sure that paper is loaded properly.
paper into the paper cassette" in Chapter 1.
Check the paper type and quality.
can I use" in Chapter 1.
Try printing using the straight-through output
to load one sheet of paper manually" in Chapter 1.
Turn over the stack of paper in the tray or try rotating the paper
180 in the input tray.
4-23
CHAPTER 4 TROUBLESHOOTING
See "How to load paper
see "How to load one
See "How to load paper
See "What kind of paper can
See "What kind of paper
See "How
See "How to load
See "What kind of paper
path. See "How