Brother MFC-P2500 User Manual page 97

!
Caution
To avoid damaging the printer by static electricity, do not touch the electrodes
shown below.
5.
Open the rear cover and pull the jammed paper out of the fuser unit.
If you have to pull the paper towards the back of the printer, the fuser may get
dirty with toner powder and may result in scattered toner on the next printed
page or pages. Print a few copies of the test page until the toner stops
scattering on the printed pages.
6.
Close the rear cover.
7.
Install the drum unit assembly and close the front cover.
Fig. 4-5 Electrodes
Fig. 4-6 Pull the jammed paper
4-10