Brother MFC-P2500 User Manual page 64

4.
To install the memory board onto the main control board, use the supplied
spacer and plug the board into the upper left connector of the main control
board.
5.
Secure the access cover with the two screws.
6.
Refit the rear cover.
7.
Reconnect the interface cable from your computer. Plug the power cord into
the AC outlet and turn on the power switch.
8.
To check that the memory board is installed correctly, you should perform a
Test Print "Print Configuration". This listing will show the current total
memory size, so you can check that it was updated.
Fig. 2-4 Install the Memory Board
2-7
CHAPTER 2 OPTIONS