Paper Handling - Brother MFC-P2500 User Manual

Paper Handling

First, ensure that you are using paper that meets Brother recommended paper specifications.
See "What kind of paper can I use" in Chapter 1.
Problem
The printer does not load
paper.
The printer does not load
paper from the manual
feed slot.
The printer cannot load
envelopes.
The printer copies, but
nothing is printed on the
copy.
A paper jam has occurred.
The printer does not print
into the output tray.
The printer does not print
on the specified paper.
(Optional Lower Tray
Unit Only)
Recommendation
If there is paper in the paper cassette, make sure it is
straight. If the paper is curled, straighten it before
printing. Sometimes it is helpful to remove the paper,
turn the stack of paper over and place it back in the
paper cassette.
Reduce the amount of paper in the paper cassette,
then try again.
Check that manual feed mode is not selected in the
printer driver.
Re-insert the paper firmly, one sheet at a time.
Make sure that manual feed mode is selected in the
printer driver.
The printer can load envelopes from the manual feed
slot. Your application software must be set up
correctly to print on the size of envelope you are
using. This is usually done in the page setup or
document setup menu of your software. See your
software application manual.
Check that the Original documents are inserted face
down in the document feeder.
Clear the jammed paper.
how to clear them"
video on the CD-ROM.
Close the rear cover.
Make sure that the cable is connected to the printer.
Make sure that the appropriate printer driver is
selected.
4-6
See "PAPER JAMS and
or the paper jam instructional