When you make a copy on paper fed from the manual feed slot, insert the
print sheet of paper into the manual feed slot after setting your original
documents.
3.
You can select the following settings using the buttons on the control panel.
To clear a setting, press the Clear button.
Enlarge/Reduce -
Density -
Document type -
Paper size -
Options
All these settings will be cleared after you press the Clear or Copy button
except the Paper Size setting.
4.
Use the 10 numeric keys to set the required number of copies on the
display.
For more than 2 copies, you can choose the STACK or SORT options by
pressing the Sort button.
5.
Press the Copy button.
For further information, go to page 1-32
For further information, go to page 1-34
For further information, go to page 1-33
For further information, go to page 1-35
For further information, go to page 1-34
NO.OF COPIES: 003
SORT: STACKED
1-30