Accessories - Hilti PMC 46 Operating Instructions Manual

2.4 Items supplied with the toolbox version
1 Combilaser
1 Soft pouch
4 Batteries
1 Operating instructions
1 Universal adapter
1 Manufacturer's certificate
1 Tripod
2.5 Information displayed during operation
LED
Laser beam

3 Accessories

Designation
Tripod
Target plate
Target plate
Laser receiver
Magnetic bracket
Telescopic brace
Frame clamp
Universal adapter
Hilti toolbox
Laser visibility glasses
The LED doesn't light.
The LED doesn't light.
The LED doesn't light.
The LED lights constantly.
The LED blinks twice every
10 seconds.
The LED blinks.
The laser beam blinks twice
every 10 seconds.
The laser beam blinks rapidly.
The laser beam blinks every 2
seconds.
Short designation
PMA 20
PMA 54/55
PRA 50/51
PMA 31
PMA 74
PUA 10
PMA 25
PMA 78
PMC 46
PUA 60
The tool is switched off.
The batteries are exhausted.
The batteries are inserted incorrectly.
The laser beam is switched on. The tool
is in operation.
The batteries are almost exhausted.
The temperature of the tool is above
50°C (122°F) or below -10°C (14°F) (the
laser beam does not light).
The batteries are almost exhausted.
The tool cannot level itself. (outside the
5° self-leveling range).
The tool is unable to level itself auto-
matically (or is set to "Inclined plane"
operating mode).
Description
The laser visibility glasses are not
protective glasses and thus do not
protect the eyes from laser beams.
As the laser visibility glasses restrict
color vision, they should be worn only
when working with this tool. Do not
wear the laser visibility glasses while
driving a vehicle on a public road.
en
13