Valor Horizon 673EDN Installation Manual

INSTALLATION MANUAL
Edgemont Fronts 673EDN / 673EDV / 673EDZ
Approved for use with Valor heater models 534 ONLY
DANGER
!
A barrier designed to reduce the risk of burns from the hot
viewing glass is provided with this appliance and must be
installed for the protection of children and other at-risk
individuals.
The 673ED Edgemont Front is designed to be used on the 534 Valor Horizon heater.
Mantel clearances are unchanged from those shown in the 534 installation manual.
35-7/8" (911 mm)
*NOTE: Bottom of plate is flush with
bottom of heater. Install bottom of
heater flush with finished hearth.
4005276-04
© Copyright 2020 Miles Industries Ltd.
Horizon
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
7/8"
Appliance (22 mm)
outline
1"
(25 mm)
1-7/8"
(48 mm)
INSTALLER: Leave this
manual with the appliance.
CONSUMER: Retain this
manual for future reference.
Note: This kit must be
installed or serviced by a
qualified installer, service
agency or gas supplier.
These instructions are to be
used in conjunction with the
main installation instructions
for the above listed heater
model.
534
Bridging Baffle
Heat exchanger
cover
Access panel
Overview (Heater sold separately)
Backing plate
Front assembly
including Barrier Screen
1