For Mac Os ® 9.1 To 9.2; For Mac Os ® X 10.2.4 Or Greater - Brother MFC-8660DN Quick Setup Manual

For Mac OS
Make sure that you have finished the instructions from Step 1 "Setting Up
the machine" on pages 4 - 11.
1
Turn off and unplug the machine from the
AC outlet and disconnect it from your
®
Macintosh if you already connected an
interface cable.
2
Turn on your Macintosh
3
Insert the supplied CD-ROM into your
CD-ROM drive.
4
Double-click the Start Here OSX icon to
install the drivers and MFL-Pro Suite. If the
language screen appears, choose your
language.
5
Click MFL-Pro Suite to install.
6
Follow the on-screen instructions, and
restart your Macintosh
®
X 10.2.4 or greater
®
.
®
.
7
After the DeviceSelector window appears,
connect the network interface cable to the
machine, and then connect it to a free port
on your hub.
The DeviceSelector window will not appear if
you have also connected a USB interface
cable to the machine before restarting your
®
Macintosh or if you are overwriting a
previously installed version of the Brother
software. If you encounter this problem
continue with the installation skipping Steps 9
to 12. You should select your Brother machine
from the Model pull-down list in the main
screen of ControlCenter2. (For details, see the
Software Use's Guide on CD-ROM.)
8
Plug in the power cord and turn on the
machine.
Continued ...
31