Tone And Pulse Dialing Mode (Canada Only); Selecting Your Language (Canada Only); Setting The Lcd Contrast; Sending In The Product Registration And Test Sheet (Usa Only) - Brother MFC-8660DN Quick Setup Manual

Tone and Pulse dialing
8
mode (Canada only)
Your machine comes set for Tone dialing service. If
you have Pulse dialing service (rotary), you need to
change the dialing mode.
1
Press Menu.
2
Press 0.
3
Press 4.
4
Press or to select Pulse (or Tone).
Press OK.
5
Press Stop/Exit.
Selecting Your
9
Language (Canada only)
1
Press Menu.
2
Press 0.
3
Press 0.
4
Select your language
by using or
5
Press Stop/Exit.
10

Setting the LCD Contrast

You can change the contrast to help the LCD look
lighter or darker.
1
Press Menu.
2
Press 1.
3
Press 8.
4
Press to increase the contrast.
—OR—
Press to decrease the contrast.
Press OK.
5
Press Stop/Exit.
(English or French)
, and then press OK.
Sending in the Product
11 Registration and Test
Sheet (USA Only)
1
Fill out the Product Registration and Test
Sheet.
2
Place the sheet face up in the Automatic
Document Feeder.
Make sure (Fax) is illuminated in Blue.
3
Enter the toll-free fax number:
1-877-268-9575.
4
Press Start.
■ You will receive a confirmation fax of your
Product Registration.
■ You can also register your product online
using the On-Line Registration link from
the installation CD-ROM or go to
http://www.brother.com/registration
Go to the next page to
install the drivers & software
11