Troubleshooting; Overview; General Problems; Cd-Rom Is Inserted, But Does Not Start Automatically - Brother MFC-7225N User Manual

8

Troubleshooting

Overview

This chapter describes procedures for troubleshooting problems you may encounter with a Brother print/scan
server, it is divided into the following sections:

General problems

Network print software installation problems
Printing problems
Protocol-specific troubleshooting
General problems

CD-ROM is inserted, but does not start automatically

If your computer does not support Autorun, the menu will not start automatically after inserting the CD-ROM.
In this case, execute setup.exe in the root directory of the CD-ROM.

How to reset the Brother print/scan server to factory default

You can reset the print/scan server back to its default factory settings (resetting all information such as the
password and IP address information). See Restoring the network settings to factory default on page 3-8.
Network print software installation problems
The Brother print/scan server is not found during setup of the network print software
installation or from the printer driver of the Brother machine in Windows
The Brother print/scan server is not found using the Simple Network Configuration

capabilities of Mac OS

Make sure you have completed the IP address setting of the Brother print/scan server according to Chapter
2 or Chapter 3 of this User's Guide before installing the network print software or printer driver. Check the
following:
1
Make sure that the machine is powered on, is on-line and ready to print.
®
X.
®
.
8 - 1
8