Brother MFC-7225N User Manual page 44

Troubleshooting
3
Verify that the print/scan server is on your network as follows:
®
For Windows
(1) Try pinging the print/scan server from the host operating system command prompt with the
command:
ping ipaddress
Where ipaddress is the print/scan server IP address (note that in some instances it can take up to
two minutes for the print/scan server to load its IP address after setting the IP address).
(2) If a successful response is received, then proceed to Windows
Peer-to-Peer print (LPR) troubleshooting, and Windows
proceed to Step 4.
®
For Macintosh
®
For Mac OS 9.1 to 9.2
(1) From the Apple menu, open the Chooser.
(2) Click the Brother Laser (IP) icon, and make sure that your print/scan server name appears in the
right frame. If it is visible, then the connection is good. Otherwise, go to Step 4.
®
For Mac OS X 10.2.4 or greater
(1) From the Go menu, select Applications.
(2) Open the Utilities folder.
(3) Double-click the Printer Setup Utility icon.
(4) Click Add.
(5) Make the following selection. Make sure that your print/scan server appears. If it is visible, then the
connection is good.
®
98/98SE/Me and Windows NT
®
2000/XP IPP troubleshooting. Otherwise,
8
®
4.0
8 - 4