5
Internet printing for Windows
Overview
®
Windows
2000/XP users can print using TCP/IP using the standard Network Printing software and IPP
protocol software built into any Windows
Note
•
You must configure the IP address on your machine before you proceed with this chapter. If you
haven't done yet, see Chapter 2 first.
•
Verify the host computer and print/scan server are either on the same subnet, or that the router is
properly configured to pass data between the two devices.
The default password for Brother print/scan servers is access.
•
®
Windows
2000/XP IPP printing
Use the following instructions if you wish to use the IPP printing capabilities of Windows
1
®
For Windows
2000: Go to the Start button, select Settings and then Printers.
®
For Windows
XP: Go to the Start button and select Printers and Faxes.
2
®
For Windows
2000: Double click the Add Printer icon to get the Add Printer Wizard.
®
For Windows
XP: Double-click Add a printer to get the Add Printer Wizard.
3
Click Next when you see the Welcome to the Add Printer Wizard screen.
4
Select Local printer or Network printer. For Windows
Printer.
®
For Windows
XP: Make sure that you select A network printer, or a printer attached to another
computer.
5
Click Next.
6
®
For Windows
2000: Select Connect to a printer on the Internet or on your intranet and then enter
the following in the URL field: http://printer_ip_address:631/ipp (Where
printer_ip_address is the IP address or the print/scan server name).
®
For Windows
XP: Select Connect to a printer on the Internet or on a home or office network and
then enter the following in the URL field: http://printer_ip_address:631/ipp (Where
printer_ip_address is the IP address or the print/scan server name).
®
2000/XP installation.
®
2000: Make sure that you select Network
®
®
2000/XP.
5
5 - 1