For Windows; 98/98Se/Me Users Only - Brother MFC-3820CN Quick Setup Manual

For Windows

Make sure that you followed the instructions in
G
When this screen appears, connect the
USB interface cable to your PC, and then
connect it to the MFC.
Turn on the MFC by plugging in the power
cord.
It will take a few seconds for the installation
screen to appear.
The installation of the Brother drivers will
automatically start. Follow the instructions
on the screen.
H
Select BRUSB: USB Printer Port, and then
click Next.
®

98/98SE/Me Users Only

1 F
to on pages 16 - 18.
I
Accept the default Printer name by selecting
Yes, and then click Next.
J
Select Yes (recommended), and then click
Finish. A test page will be printed so you
can check the print quality.
K
If the test page is printed correctly, click
Yes. If you click No, follow the prompts on
the screen to correct the problem.
If the ReadMe3820CN.wri file shown in step
L
appears, close the ReadMe3820CN.wri
file and then click Finish after printing the
test page.
Continued...
19