Setting The Paper Size; Setting The Ring Volume - Brother MFC-210C User Manual

Setting the Paper Size

You can use five sizes of paper for printing copies: Letter, Legal, A4,
A5, and 10 x 15 cm and three sizes for printing faxes: Letter, Legal
and A4. When you change the type of paper you load in the MFC,
you will need to change the setting for Paper Size at the same time
so your MFC can fit an incoming fax on the page.
1
Menu/Set
Press
2
Press or
▲
Menu/Set
Press
3
Stop/Exit
Press

Setting the Ring Volume

You can turn the ring Off or you can select the ring volume level.
1
Menu/Set
Press
2
Press or
▲
Menu/Set
Press
3
Stop/Exit
Press
—OR—
You can adjust the ring volume when your MFC is idle (not being
used). In Fax mode
level. Every time you press these keys, the MFC will ring so you can
hear the active setting as the LCD shows it. The volume changes
with each key press. The new setting will stay until you change it
again.
2 - 5 GETTING STARTED
1 3
, , .
to select Letter , Legal , A4 , A5 or 10x15cm .
▼
.
.
1 4 1
, , , .
to select Low , Med , High or Off .
▼
.
.
, press or to adjust the volume