Change The Paper Size And Paper Type; Change The Check Paper Size Setting - Brother MFC-J6530DW Basic User's Manual

Change the Paper Size
and Paper Type
Set the Paper Size and Paper Type settings
for the paper tray.
• To get the best print quality, set the
machine for the type of paper you are
using.
• When you change the size of the paper
you load in the tray, you must change the
Paper Size setting on the LCD at the same
time.
1
Press [Settings] > [Tray
Setting].
2
Press the tray option you want.
(MFC-J6730DW)
3
Press [Paper Type].
4
Press a or b to display the paper type
options, and then press the option you
want.
Use plain paper only in Tray #2.
(MFC-J6730DW)
5
Press [Paper Size].
6
Press a or b to display the paper size
options, and then press the option you
want.
7
Press .
The machine ejects paper with the printed
surface face up onto the paper tray at the
front of the machine. When you use
glossy paper, remove each sheet at once
to prevent smudging or paper jams.
Related Information
• Error and Maintenance Messages on
page 39
Change the Check
Paper Size Setting
If the Check Paper setting is set to [On] and
you pull the paper tray out of the machine, the
LCD displays a message asking if you want to

change the Paper Size and Paper Type

settings.
The default setting is [On].
1
Press [Settings] > [All
Settings] > [General Setup].
2
Press [Tray Setting].
(MFC-J6730DW)
3
Press a or b to display the [Check
Paper] option, and then press it.
4
Press [On] or [Off].
5
Press .
Related Information
• Error and Maintenance Messages on
page 39
17