Installation Instructions - HAMPTON BAY 1LT Instruction Manual

PARTS INCLUDED FOR INSTALLATION (parts are not to scale):
2ea Lock Nuts (#2)
2ea Outlet Box Screws (#10)

INSTALLATION INSTRUCTIONS:

1. Screw the two Mounting Screws (#11) onto the Cross Bar (#9). Mount the Cross Bar (#9)
to the Outlet Box (#7) using the two Outlet Box Screws (#10). [Make sure the threads of
the Mounting Screws (#11) are facing outside when the Cross Bar (#9) is attached to the
Outlet Box (#7).]
2. Wrap the ground wire from the fixture around the Ground Screw (#12) on the Cross Bar
(#9), and then connect the ground wire from the fixture to the ground wire from the
Outlet Box (#7). Connect the white wire from the fixture to the white wire (neutral wire)
from the Outlet Box (#7). Connect the black wire from the fixture to the black wire (live
wire) from the Outlet Box (#7). Cover the three connections using the three Wire
Connectors (#8). Wrap the three wire connections with electrical tape for a more secure
connection. Position the wires back inside the Outlet Box (#7). Note: If you have
electrical questions, consult your local electrical code for approved grounding methods.
3. Place the fixture body on the wall by aligning the protruding Mounting Screws (#11) all
the way through the holes on the Wall Plate (#1). Tighten the fixture to the wall by
screwing the two Lock Nuts (#2) onto the two protruding Mounting Screws (#11).
4. Installation is complete. Turn on the power at the circuit breaker or fuse box. Turn the
light switch on the wall and the light Switch (#13 on Page 5) on the fixture to activate the
fixture.
Page 6
3ea Wire Connectors (#8)
2ea Mounting Screws (#11)
1ea Cross Bar (#9)
1ea Ground Screw (#12)